Setup your Belkin Router
To setup your Belkin
Router with your Universal Broadband Account, please follow the steps below.
1. Confirm that your Belkin Router is an ADSL router, and not just a simple network router. You can find this information Belkin's Product Support Website
2. Once you have confirmed the router type, setup the hardware and connect it with your PC. For more help with setting up the router you can call 1888 987 893.
1. Confirm that your Belkin Router is an ADSL router, and not just a simple network router. You can find this information Belkin's Product Support Website
2. Once you have confirmed the router type, setup the hardware and connect it with your PC. For more help with setting up the router you can call 1888 987 893.
3. Once the Router hardware is connected, check if your PC is communicating correctly with router. (You might need to restart the computer, after the router is connected to it). On the desktop click on Start and then on Run. In the open box, type cmd.
In the open box,
type cmd.
It will bring up the command prompt window.
Type the command ipconfig in that window and press the Enter / Return key on the keyboard. It will bring up results similar to the image below
If the IP Address is in the range of 192.168.x.x then the network setup should be ok. Note the values of IP Address and Default Gateway. Close the command prompt window.
4. Place filters on all the phone sockets, and connect the RJ 11 cable between the filter and router. (For more information and instant help call on toll free number 1800 987 893) It should light up the SYN light on the router.
5. Open Internet Explorer window and in the address bar type in the address that you found for Default Gateway. In case of belkin router it should be 192.168.2.1. So in this case address bar should contain either "http://192.168.2.1" or "http://192.168.2.1:88". Then click on the Go button.
6. It should bring up a screen similar to the image below. Refer your product manual for the default Router password or leave blank, just click on the Login button.
7. This should bring up the Belkin Router Setup Utility. Click on the Wizard link on the top bar of this page. In the Connection type options, select PPPoA. Then click on Next button to continue. Notice that on the top right side of the page, it says "No Connection". Once the setup wizard is complete, it should change to "Connected"
8. In the next window that appears, put your username and password in the respective boxes. Make sure that there are no spelling or case mistakes while typing the password. Then confirm the password in the Retype Password: box. In case of VPI/VCI:, type 0 and 38 in the left and the right boxes . respectively. For Belkin router password recovery you can call at toll free number for technical help 1800 987 893
Then click on Next to
continue.
9. This will now bring up the confirm settings window. Click on the Apply button to save the settings.
It may take up to 5 minutes to save and update the settings. Once completed, you will see, "Connected" on the top right side of the window. Once you see that close this window and open your browser window to go to any website.
I
9. This will now bring up the confirm settings window. Click on the Apply button to save the settings.
It may take up to 5 minutes to save and update the settings. Once completed, you will see, "Connected" on the top right side of the window. Once you see that close this window and open your browser window to go to any website.
I
If you are still not
able to make a connection to Internet, try basic router troubleshooting.
If you are still not
able to connect using your belkin router, try connecting with the modem
supplied with your Universal broadband connection.
If you are able to connect using the modem and not with your Belkin Router, contact Belkin tech Support. At 1800 987 893
If you are not able to connect using the modem, then please contact out broadband support team by telephone, email or letter.
For best results and complete solution you can contact our technical team for that or you visit our website for further details. Please feel free to call and take professional help. Our technicians are genuine and Microsoft certificated.
If you are able to connect using the modem and not with your Belkin Router, contact Belkin tech Support. At 1800 987 893
If you are not able to connect using the modem, then please contact out broadband support team by telephone, email or letter.
For best results and complete solution you can contact our technical team for that or you visit our website for further details. Please feel free to call and take professional help. Our technicians are genuine and Microsoft certificated.
http://www.support-router.com/au/belkin-support/
Our toll free numbers:
USA: 1888 479 2017
AUS: 1800 987 893
This comment has been removed by a blog administrator.
ReplyDeletevery helpful! Here you will get all kind of solution like Belkin Support
ReplyDelete