SET UP BELKIN ROUTER WITH UNIVERSAL BROADBAND ACCOUNT

Setup your Belkin Router

To setup your Belkin Router with your Universal Broadband Account, please follow the steps below.

1. Confirm that your Belkin Router is an ADSL router, and not just a simple network router. You can find this information Belkin's Product Support Website

2. Once you have confirmed the router type, setup the hardware and connect it with your PC. For more help with setting up the router you can call 1888 987 893.

3. Once the Router hardware is connected, check if your PC is communicating correctly with router. (You might need to restart the computer, after the router is connected to it). On the desktop click on Start and then on Run. In the open box, type cmd.

In the open box, type cmd.

                                               It will bring up the command prompt window.

Type the command ipconfig in that window and press the Enter / Return key on the keyboard. It will bring up results similar to the image below



 

Note the values of IP Address and Default Gateway in the ipconfig command results. If the IP address is in the range of 169. 254.x.x or 0.0.0.0, then your PC is not communicating to the router. In such a case contact Belkin router support for technical help 1800 987 893

If the IP Address is in the range of 192.168.x.x then the network setup should be ok. Note the values of IP Address and Default Gateway. Close the command prompt window.

4. Place filters on all the phone sockets, and connect the RJ 11 cable between the filter and router. (For more information and instant help call on toll free number 1800 987 893) It should light up the SYN light on the router.

5. Open Internet Explorer window and in the address bar type in the address that you found for Default Gateway. In case of belkin router it should be 192.168.2.1. So in this case address bar should contain either "http://192.168.2.1" or "http://192.168.2.1:88". Then click on the Go button.

6. It should bring up a screen similar to the image below. Refer your product manual for the default Router password or leave blank, just click on the Login button.







7. This should bring up the Belkin Router Setup Utility. Click on the Wizard link on the top bar of this page. In the Connection type options, select PPPoA. Then click on Next button to continue. Notice that on the top right side of the page, it says "No Connection". Once the setup wizard is complete, it should change to "Connected"














8. In the next window that appears, put your username and password in the respective boxes. Make sure that there are no spelling or case mistakes while typing the password. Then confirm the password in the Retype Password: box. In case of VPI/VCI:, type 0 and 38 in the left and the right boxes . respectively. For Belkin router password recovery you can call at toll free number for technical help 1800 987 893

 Then click on Next to continue.




9. This will now bring up the confirm settings window. Click on the Apply button to save the settings.








It may take up to 5 minutes to save and update the settings. Once completed, you will see, "Connected" on the top right side of the window. Once you see that close this window and open your browser window to go to any website.

I

If you are still not able to make a connection to Internet, try basic router troubleshooting.

If you are still not able to connect using your belkin router, try connecting with the modem supplied with your Universal broadband connection.

If you are able to connect using the modem and not with your Belkin Router, contact Belkin tech Support. At 1800 987 893

If you are not able to connect using the modem, then please contact out broadband support team by telephone, email or letter.

For best results and complete solution you can contact our technical team for that or you visit our website for further details. Please feel free to call and take professional help. Our technicians are genuine and Microsoft certificated.

http://www.support-router.com/au/belkin-support/

Our toll free numbers:

USA:    1888 479 2017

AUS:    1800 987 893

SETUP BELKIN ROUTER FOR CABLE MODEM

 Setup Belkin Router for Cable Modem

1)  If you have Cable Internet connection, you should select Dynamic option and click next. In most cases you may need to type the host name provided by Cable Internet Service Provider.

2.            In addition to this, to work with cable modem, you may need to clone the MAC address of your computer using the link/button Change WAN MAC Address.

Use the clone button to copy MAC address of your computer. Click Apply Changes after entering the details. After having this step, Belkin will be ready to work with your cable internet connection. This step is important because your Internet Service Provider recognize registered users using the MAC address of the PC used while activating the connection. If you use a different PC, your ISP will not allow it to access Internet because of non registered MAC address. By MAC address cloning feature we can override this restriction.

2. Setup Belkin Router for DSL Modem Using PPPoE

1.            For most of the DSL Internet connections, you must select PPPoE 

Click Next

2.             Now Enter the Username and password provided by your DSL Internet Service provider. 

Here you should enter the user name and password provided by your Internet Service Provider. After entering the details you should click on save settings. Now your Belkin router is configured in PPPoE for DSL broadband connections. If you do not configure in PPPoE(means in bridge mode), you may need to enter username and password (provided by ISP) on your PC when ever you access Internet. Also you will not be able to share the broadband connection in this bridge mode.

                            FOR BETTER SOLUTIONS TAKE HELP OF PROFESSIONAL TECHNICIANS ..

We are happy to help you:

• Resetting your wireless Belkin Router Password
• Setting up Belkin Router and Modem software
• Slow data transfer speed
• Re-configure Belkin Router
• Signal strength low
• Securing network security
• Network & to ensure that no one else is using it.
• Securing your Wi-Fi through keys and password
• Updating firmware for latest version
• Securing network.

YOU CAN CALL US AT OUR TOLL FREE NUMBER        1888 479 2017

OR LOG ON TO OUR WBSITE:

https://www.icognix.net/belkin-support/

BELKIN ROUTER SETTING UP THE MANUALLY

 

Step 1:

Connect the computer to one  of the Ethernet ports of the router.
 

                                     

                                                                                                                              

  STEP 2

      

Now open  a web browser and enter the router’s IP address in the Address bar.

NOTE:  The default IP address of the Belkin routers is 192.168.2.1. 
 

If you face any issue please call us at 1888 479 2017

Step 3:

After entering the IP address now click on login tab
 

Step 4:

Leave the Password field blank and click Submit.

If you encounter issues in accessing the router’s web-based setup page, call at 1888 479 2017

Step 5:

Now under WAN,  Click Connection type

 

Step 6:
Select your Connection Type and click Next.

You can call your internet service provider or

For assistance call at  1888 479 2017

 

Step 7:  After submitting details click apply changes.

Note:  now you would able to connect to your internet.

Now if this steps doesn’t help you  can simply call our technician for assistance they will fix it for you. You can easily call our technicians at our toll free number that is : 1888 479 2017. Or by visiting our website

https://www.icognix.net/belkin-support/.

We would be happy to serve you.